HiLetgo HD44780 2004 LCD 20x4 2004A Character LCD Screen Display Module Blue Backlight with IIC/I2C Serial InterfaceAdapter
HiLetgo
More Details
10
Product rating
Product features
5.33
Online Popularity
0.47
Customer Positive Reviews
10.0
Customer Negative Reviews
0.0
Top Positive Reviews
Excellent device which works perfectly
I2C Backpack Make the LCD Simple to Use
Works Great
Top Negative Reviews
No negative reviews yet.
Product Highlights:
Description:
2004 204 20X4 Character LCD Display Module Blue Backlight.
Blue backlight
Fully assembled and tested Serial LCD 20x4 Module
Display Format: 20 Characters x 4 lines
Supply voltage: 5V
The module can be easily interfaced with a MCU
The module is a low-power consumption character LCD Module with a built-in controller
Size: approx. 9.8cm x 6cm x 1.2cm
Package Included:
1* HD44780 2004 LCD Display Module
HD44780 2004 LCD 20x4 2004A Character LCD Display Module
VSDISPLAY 7" 7 inch 1024x600 IPS LCD Screen with HD-MI Controller Board Fit for Raspberry Pi
VSDISPLAY
More Details
9.6
Product rating
Product features
6
Online Popularity
0.73
Customer Positive Reviews
10.0
Customer Negative Reviews
0.0
Top Positive Reviews
Great little screen
Value for money
Great screen for the money!
Top Negative Reviews
No negative reviews yet.
Product Highlights:
LCD Controller Board:
HD-MI LCD Board Work for 50P TTL Interface LCD Screen
Power Connector: PH2.0 Micro USB
Input Power Adapter: 5Vdc More than 2A Mirco-USB Connector
Support 5V 1A Power For Raspberry Pi PH2.0 Connector
Come In Standby Model When Not Input Signal
Standby Model <1W
Video Input: HD-MI
Audio: Earphone
OSD: Brightness Contrast Auto Language And So On
Language: English French German Spanish Italian And So On
Board Size: 88mm x 53mm x 7mm
7" TB070-I5024H45C-02 1024X600 IPS LCD Screen:
Display Mode IPS, Normally Black, Transmissive
Resolution 1024RGB)×600
Outline Size 164.9× 100×3.5 (H×V×D)
Display Area 154.21 × 85.92 (H×V)
Brightness 400 cd/m² (Typ.)
Contrast Ratio 800:1 (Typ.) (TM)
Viewing Angle 85/85/85/85 (Typ.)(CR≥10) [Left / Right / Up / Down]
Signal Interface Parallel RGB (1 ch, 8-bit) , 50 pins , FPC
Backlight WLED
Input Voltage 3.3V (Typ.)
Packing list :
1× HD-MI LCD Controller Board VS-TY2660H-V812
1× 7inch TB070-I5024H45C-02 1024X600 IPS LCD Screen
1× USB Power Cable
1× Mirco-USB Power Cable
1× Keyboard With Cable
1× Remote Control (Battery Not included)
7" TB070-I5024H45C-02 1024X600 IPS LCD Screen: Resolution 1024RGB)×600 Outline Size 164.9× 100×3.5 (H×V×D) Display Area 154.21 × 85.92 (H×V) Brightness 400 cd/m² (Typ.) Contrast Ratio 800:1 (Typ.) (TM) Viewing Angle 85/85/85/85 (Typ.)(CR≥10) [Left / Right / Up / Down]
HD-MI LCD Board Work for 50P TTL Interface LCD Screen (Video Input: HD-MI Audio: Earphone)
Input Power Adapter: 5Vdc More than 2A Mirco-USB Connector. Power Connector: PH2.0 Micro USB. Support 5V 1A Power For Raspberry Pi PH2.0 Connector.
Come In Standby Model When Not Input Signal. Standby Model <1W.
Packing list : 1× HD-MI LCD Controller Board VS-TY2660H-V812 1× 7inch TB070-I5024H45C-02 1024X600 IPS LCD Screen 1× USB Power Cable 1× Mirco-USB Power Cable 1× Keyboard With Cable 1× Remote Control (Battery Not included)
A-MIND Screen Replacement For iPad Air 1st Generation 9.7inch A1474 A1475 A1476（Not For Air 2）LCD Display And Touch Screen digitizer With Home Button & Free Tool Repair Kit & Screen Protector (Black)
More Details
9.6
Product rating
Product features
7.33
Online Popularity
0.4
Customer Positive Reviews
10.0
Customer Negative Reviews
0.0
Top Positive Reviews
No positive reviews yet.
Top Negative Reviews
Home button has issues
Product Highlights:
Color:Black
Note:
â—†This product does not come with a manual, so please see the replacement procedure on Youtube etc. before replacing.
â—†Attaching requires some knowledge and technique, so if you are an amateur, it is better to ask a professional business.
â—†If the tablet cannot be used for a reason other than a broken LCD panel, then replacing the LCD panel will not work.please confirm.
â—†Since this product is an imported product, it may have slight stains. Please note.
â—†We are not responsible for any damages or malfunctions caused by incorrect installation work. Please use at your own risk.
â—†The lcd is covered with a film to prevent the screen from being scratched in transit.
Tips:
???? Screen replacement parts are very fragile products that must be carefully and gently opened and installed.
Don't strongly pressed on the edges or four corners of the screen. It is easily broken.
Don't bend the LCD cable too much. Above 90 degrees the display will be black.
???? Turn off the tablet and disconnect the battery cable before installation.
Clean the LCD connector with cleaning paper (included in the package).
???? Pay attention to the position of the screws, place them in the correct position, as they are of different dimensions and lengths.
Carefully connect the touchline and the battery flexible cable.
Connect the battery, reboot the IPad, and check it.
???? If the line is displayed on the screen or the touch does not respond even after installation, remove the LCD display, clean the connector, and then reinstall it.
✅Compatibility ----- For iPad Air 1st Generation 9.7inch A1474 A1475 A1476 only. Contains a touch screen digitizer (with adhesive backing and home button) and an LCD display in two separate sections.Please make sure you know the correct model number before purchasing it. The wrong model may damage your ipad.
✅Applications ------ Repair faulty screen and heal ruptured lcd, dead point pixels, touch non-action, touch response problem, display problem, false-color problem, non-functional screen, etc. Note: If your iPad becomes unusable for any reason other than assembly, please check the cause of the problem before purchasing, as replacing the lcd will not fix the problem.
✅Package ------ 1 x iPad Air 1st touch screen & LCD display, 2 x tool kit, 1 x 3mm Double Sided Tape, 1 x screen protector.There is a protective film on the surface of the lcd, and during the quality inspection, there may be dirt residue, which is a normal phenomenon. Before connecting the touch screen to the liquid crystal, please peel off this film.
✅Professional installation needed ------ Excluding installation tutorial. Please view video tutorials on YouTube before installing. We do not recommend that customers who do not have the skills or experience to make their own replacement repairs. parts damaged during installation are not accepted for return.
✅After-Sales Service ----- We offer a 6-month free replacement coverage for non-human product damage.If you have any questions about the installation tutorials, packages or products, please feel free to contact us via Amazon Messages.If you notice any cracks when receiving the package, please include a photo and contact our service team immediately.
VSDISPLAY 12.6" NV126B5M-N41 12.6inch1920X515 LCD Screen Work with 2 HD-MI Mini LCD Controller VS-RTD2556HM-V1
VSDISPLAY
More Details
9.6
Product rating
Product features
6
Online Popularity
0.47
Customer Positive Reviews
10.0
Customer Negative Reviews
0.0
Top Positive Reviews
Great as an auxiliary monitor for Ultrawides
Awesome
Top Negative Reviews
No negative reviews yet.
Product Highlights:
LCD Controller Board:
HD-MI Board Work for 30Pin EDP LCD Screen
Input Power Adapter: 12Vdc More than 2A.
Come In Standby Model When Not Input Signal
Standby Model <0.3W
Audio Input: 2HD-MI Mini
Audio Output: Earphone
OSD: Brightness Contrast VOL+ VOL- Language And So On
Language: English French German Spanish Italian And So On
Board Size: 82mm x 60mm x 5mm
12.6" NV126B5M-N41 1920X515 LCD Screen:
Display New Mode ADS, Normally Black, Transmissive
Resolution 1920RGB)×515
Outline Size 315.61×94.02×5.3(H×V×D)
Display Area 309.31×82.97 (H×V)
Brightness 250 cd/m² (Typ.)
Contrast Ratio 1200:1 (Typ.) (TM)
Viewing Angle 85/85/85/85 (Typ.)(CR≥10) [Left / Right / Up / Down]
Signal Interface eDP (2 Lanes), Connector, 40pins
Backlight WLED
Input Voltage 3.3V (Typ.)
Packing list:
1× 2 HD-MI Mini LCD Controller VS-RTD2556HM-V1
1× 12.6inch NV126B5M-N41 1920X515 IPS LCD Screen
1× Signal Cable
1× Keyboard With Cable
When use DC Connector as input. Power Supply Input Voltage 5Vdc- 12Vdc.
Micro USB output 5Vdc 500mA.
When use Micro USB as input. Power Supply Input Voltage 5Vdc.
When use 5Vdc as input. Power Supply Input current more than 2A.
When use 12Vdc as input. Power Supply Input current more than 1A.
Require Input Power Adapter:12Vdc More than 2A. (Help to notice there in no power adapter in the packing list) .Come In Standby Model When Not Input Signal Standby Model <1W
Industrial 12.6" wide screen Fit for Car Monitor car display or DIY display screen monitor
Packing list:1× 2 HDMI Mini LCD Controller VS-RTD2556HM-V1 1× 12.6inch NV126B5M-N41 1920X515 IPS LCD Screen 1× Signal Cable 1× Keyboard With Cable(help to notice there is no power adapter in the packing list, if you need one ,you can go our store to get )
5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module I2C OLED Screen Driver DC 3.3V~5V (White Display Color)
Frienda
More Details
9.4
Product rating
Product features
6
Online Popularity
2.33
Customer Positive Reviews
9.7
Customer Negative Reviews
0.3
Top Positive Reviews
Works fine. I added some notes on using with the Seeeduino XIAO.
Great Little OLED Display!
Good displays, without pin headers pre-soldered
Nice displays
Works as stated
Top Negative Reviews
No negative reviews yet.
Product Highlights:
Color:White Display Color
5 Pieces I2C display module 0.91 inch I2C OLED display module I2C OLED screen driver DC 3.3V~5V
Features:
Classic display color:
There are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
Power-saving display:
The i2c oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections; Please note that these I2C OLED display module comes without pin headers.
Specifications:
Size: 0.91 inch OLED
Resolution: 128 x 32
Size: 38 x 12 mm
Interface type: IIC interface
Display color: blue or white
Pin description:
GND: Power Ground
VCC: Power + (DC 3.3 - 5v)
Operating temperature: -40 ~ 85 celsius degree
SCL: clock line
SDA: data line
Package includes:
5 x I2C OLED display module
Notes:
The mention of brand names and any related models above is only for purposes of demonstrating compatibility, and our trademark is Frienda.
What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight
Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections; Please note that these I2C OLED display module comes without pin headers
More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc.; 3.35v Power; Operating temperature: -40 - 85 ℃; Resolution: 128 x 32
Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with ESP8266, ESP32, STM32, etc.
Color:White Light
2 pieces I2C display module 0.91 inch I2C OLED display module I2C OLED screen driver dc 3.3V - 5V
Features:
Classic display color:
There are 2 pieces OLED display modules with classic display color, self illumination with no need of backlight
Power-saving display:
The I2C OLED display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections; Please note that these I2C OLED display module comes without pin headers.
Specifications:
Driver IC:
Size: 0.91 inch OLED
Resolution: 128 x 32
Size: 38 x 12 mm
Interface type: IIC interface
Pin description:
GND: power ground
VCC: Power + (DC 3.3 - 5V)
Operating temperature: -40 - 85 degree Celsius
SCL: clock line
SDA: data line
Package includes:
2 x I2C OLED display modules
Notes:
The mention of brand names and any related models above is only for purposes of demonstrating compatibility, not as trademarks.
What you will get: you will get 2 OLED display modules with classic display colors, self illumination with no need of backlight
Power-saving display: the I2C OLED display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections; Please note that these I2C OLED display module comes without pin headers
More details: this I2C LCD display is compatible with Arduino, ESP8266, ESP32, STM32, etc., 3.35V power; Operating temperature: -40 - 85 degree Celsius; Resolution: 128 x 32
Good compatibility: this I2C OLED display module is compatible with Raspberry Pi 4B/ 3B+/ 3B/ 2B/ Zero, compatible with Arduino, also compatible with ESP8266, ESP32, STM32, etc.
VSDISPLAY 13.3" 13.3 Inch 1920X1080 IPS LCD Screen N133HSE-E21 with HD-MI VGA Controller Board Kit
‎VSDISPLAY
More Details
9.2
Product rating
Product features
4
Online Popularity
0.87
Customer Positive Reviews
10.0
Customer Negative Reviews
0.0
Top Positive Reviews
Works great!
pi 4 project
Good display for dakboard.
Worked Perfectly
Service and Quality
Top Negative Reviews
Great little Screen not bright enough
Product Highlights:
LCD Controller Board:
HDMI VGA Board Work for 30Pin EDP LCD Screen
Input Power Adapter: 12Vdc More than 2A.
Come In Standby Model When Not Input Signal
Standby Model <0.3W
Audio Input: HDMI PC-Audio In
Audio Output: Speaker
OSD: Brightness Contrast VOL+ VOL- Language And So On
Language: EnglishÂ
Board Size: 107mm x 55mm x 16mm
13.3" LCD Screen N133HSE-E21:
Display Mode AAS, Normally Black, Transmissive
Resolution 1920RGB)×1080
Outline Size 305.35(W)×187.55(H) ×5.2(D) mm
Display Area 293.76(W)×165.24(H) mm
Brightness 350 cd/m² (Typ.)
Contrast Ratio 700:1 (Typ.) (TM)
Viewing Angle 89/89/89/89 (Typ.)(CR≥10) [Left / Right / Up / Down]
Signal Interface eDP (2 Lanes) , Connector , 30 pins
Backlight WLED
Input Voltage 3.3V (Typ.)
Packing list:
1× HDMI VGA LCD Controller Board VS-RTD2556HV-V1
1× 13.3inch N133HSE-EB2 1920X1080 IPS LCD Screen
1× Converter Board
1× Signal Cable
1× Keyboard With Cable
13.3" LCD Screen N133HSE-E21: Resolution 1920RGB)×1080 Outline Size 305.35(W)×187.55(H) ×5.2(D) mm Display Area 293.76(W)×165.24(H) mm Brightness 350 cd/m² (Typ.) Contrast Ratio 700:1 (Typ.) (TM) Viewing Angle 89/89/89/89 (Typ.)(CR≥10) [Left / Right / Up / Down].
HD-MI VGA Board Work for 30Pin EDP LCD Screen (Audio Input: HDMI PC-Audio In Audio Output: Speaker)
Recommend Power Adapter Spec. Input Power Adapter: 12Vdc More than 2A. (VSDISPLAY Power Adapter, AC 100-240V Input to 12V DC,2A Output ,Power Supply, US Plug , Fit SC24W-1202000U, Fit for All Types of VSDISPLAY LCD Controller Board)
Come In Standby Model When Not Input Signal. Standby Model <0.3W.
Packing list: 1× HDMI VGA LCD Controller Board VS-RTD2556HV-V1 1× 13.3inch N133HSE-EB2 1920X1080 IPS LCD Screen 1× Converter Board 1× Signal Cable 1× Keyboard With Cable (Please Note There is No Power Adapter in The Packing List.)
VSDISPLAY 5" ZJ050NA-08C 5 inch 640X480 LCD Screen Work with HD-MI LCD Controller Driver Board VS-TY2660H-V1 (AT050TN22 Replacement Panel)
VSDISPLAY
More Details
9.2
Product rating
Product features
6.67
Online Popularity
0.73
Customer Positive Reviews
10.0
Customer Negative Reviews
0.0
Top Positive Reviews
Good find, a complete solution
Worked For Me
Nice
Solid choice
Top Negative Reviews
Terrible viewing angles! —>> too expensive
Description missing a few details
Great little display, but the quality control isnt great and the price is steep
Product Highlights:
LCD Controller Board:
HD-MI LCD Board Work for LVDS Interface LCD Screen
Input Power Adapter:12Vdc More than 2A.
Come In Standby Model When Not Input Signal
Standby Model <1W
Video Input: HD-MI
OSD: Brightness Contrast Auto Language And So On
Language: English French German Spanish Italian And So On
Board Size:74mm x 53mm x 12mm
5" ZJ050NA-08C 640X480 LCD Screen:
Display Mode TN, Normally White, Transmissive
Resolution 640（RGB)×480
Outline Size 117.65 × 88.43×5.9 (H×V×D)
Display Area 101.76 × 76.32 (H×V)
Brightness 250 cd/m² (Typ.)
Contrast Ratio 500:1 (Typ.) (TM)
Viewing Angle 70/70/50/70 (Typ.)(CR≥10) [Left / Right / Up / Down]
Signal Interface 50 pins Parallel RGB (1 ch, 8-bit) , FPC
Backlight WLED
Input Voltage 3.3V (Typ.)
Packing list :
1×HD-MI LCD Controller Board VS-TY2660H-V1
1× 5inch ZJ050NA-08C 640X480 LCD Screen
1× Tcon Board HCR-TCON V1.1
1× LVDS Cable
1× Keyboard With Cable
1× Remote Control(Battery Not included)
LCD Controller Board: Input Power Adapter spec. need 12Vdc More than 2A. Help to notice there is no power adapter in the packing list , if you need one , recommend go the "VSDISPLAY" store ,get the one "VSDISPLAY Power Adapter, AC 100-240V Input to 12V DC,2A Output,Power Supply, US Plug,Fit for Many Types of VSDISPLAY LCD Controller Board"
When you get the products, help to follow this link pictures to connect and power on it .
MakerFocus 6pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V for Ar duino
‎MakerFocus
More Details
9.2
Product rating
Product features
7.33
Online Popularity
10
Customer Positive Reviews
9.6
Customer Negative Reviews
0.4
Top Positive Reviews
Really Wonderful little displays!
Awesome little OLED display!
Only if you know what you're doing
Need moAr!
except the shipping was terrible. 2 units in a static proof bag that ...
Top Negative Reviews
It looks wonderful. However
Really small.
Not much longevity, not suitable for a permanent display
Received it promptly
The one I got works great but....
Product Highlights:
Color:Blue 6pcs
6pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V for Ar duin Description:
OLED display, no need backlight, self-illumination.
The display performance is better than the traditional LCD display, also lower consumption.
Specifications:
Driver IC: SSD1306
Size: 0.91 inch OLED
Resolution: 128 x 32
Size: 38 * 12 mm
Interface Type: IIC interface
Display Color: Blue
Pin Description:
GND: Power Ground
VCC: Power + (DC 3.3 ~5v)
Operating temperature: -40 ~ 85℃
SCL: Clock Line
SDA: Data Line
Package Including
6 * 0.91 Inch I2C SSD1306 OLED Blue Display Module
The product description link is obtained in the product description
OLED display, no need backlight, self-illumination; Display Color: Blue. Plz note: These I2C OLED Display Module comes without pin headers.
The display performance is better than the traditional LCD display, also lower consumption; IIC (I2C communications) simplifies connections.
Use with Ar duino, ESP8266, ESP32, STM32, etc; 3.35v Power; Operating temperature: -40 - 85 ℃; Resolution: 128 x 32.
We have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click "MakerFocus" and click "Ask a question" to email us! Looking forward to your consultation!
Replacement LCD Display Screen for Nintendo Switch Lite (Not for Nintendo Switch)
Z&Hveez
More Details
9
Product rating
Product features
6
Online Popularity
3.87
Customer Positive Reviews
9.1
Customer Negative Reviews
0.9
Top Positive Reviews
Great Product - Even I can install it lol!
Great product
Looks and works great !
It works great! (video proof!)
Make sure you have the right tools
Top Negative Reviews
No negative reviews yet.
Product Highlights:
Notes
Replacement Screen for Switch Lite Only.
Screen replacement requires professional skills, any inappropriate install may cause the screen damaged.
No installation guides. If you have no experience repairing a broken screen, please search the installation video on Youtube then follow it to replace the new LCD screen. The screen damage during installation may affect your warranty coverage.
The adhesive is suitable for both Switch and Switch Lite. Cut the adhesive into small pieces according to the screen size of the Switch Lite and you can use it to fix the new digitizer.
Â
Package Includes:
1 x Replacement LCD screen for Switch Lite.
Â
If you have any quality issues or questions, send us an email and we will appreciate a new chance to provide you with better service.
Replacement Screen for Switch Lite Only. The adhesive is suitable for both Switch and Switch Lite. Cut the adhesive into small pieces according to the screen size of the Switch Lite and you can use it to fix the new digitizer.
Screen replacement requires professional skills, any inappropriate install may cause the screen damaged.
No installation guides. If you have no experience repairing a broken screen, please search the installation video on Youtube then follow it to replace the new LCD screen.
All products have passed the strict tests and 100% in good condition before shipment.
If you have any quality issues or questions, send us an email and we will appreciate a new chance to provide you with better service. ????Attention: Not for Nintendo Switch
