PoE Texas 16 Port 802.3at Gigabit On-Demand PoE Injector with Two 56V 120W Power Supplies for PoE Cameras, IP Phones, WiFi Access Points and More
PoE Texas
More Details
9.4
Product rating
Product features
7.33
Online Popularity
0.2
Customer Positive Reviews
10.0
Customer Negative Reviews
0.0
Top Positive Reviews
Works well, and very small
Top Negative Reviews
No negative reviews yet.
Product Highlights:
Instantly upgrade any network switch or router to Gigabit Power over Ethernet
Use to power IEEE 802.3at (PoE+) devices like, WiFi Access Points and Cameras. Compatible with Active Cisco and Meraki WiFi Access Points and other devices - Please check manufacturer specifications for compatibility
Active auto-negotiation feature offers power on demand and protects non-PoE devices - power remains OFF until a compatible device is connected
Two UL/FCC/DoE Certified power supplies offer 56 volts and up to 240 available watts - Max output per port is 30 watts for PoE+ devices
Backed by 1-year warranty. For expert technical support from Austin Texas, please call 512 479 0317
PoE Texas AT-16 | Gigabit 16 Port 802.3at On-Demand Power Over Ethernet Injector for PoE Cameras, IP Phones, WiFi Access Points (Power Supplies Sold Separately)
PoE Texas
More Details
9.4
Product rating
Product features
7.33
Online Popularity
0.2
Customer Positive Reviews
10.0
Customer Negative Reviews
0.0
Top Positive Reviews
Works well, and very small
Top Negative Reviews
No negative reviews yet.
Product Highlights:
Instantly power 802.3at PoE+ devices like WiFi Access Points, Cameras and more
Active auto negotiation feature will only provide power when a compatible device is connected
10/100/1000 Gigabit data capability works with your network switch or router
Power Supply NOT included - Use with a UL certified 48v or 56v power supply with a 2.1mm x 5.5mm DC barrel or direct wire to the Phoenix connector
Backed by our 1 year manufacturer warranty - For expert technical support from Austin, TX please call 512 479 0317
PoE Texas GPOE-8A-48v60w | 8 Port Gigabit Passive PoE Injector for PoE Cameras, IP Phones and WiFi Access Points | Includes 48 Volt 60 Watt Power Supply
‎PoE Texas
More Details
9
Product rating
Product features
9.33
Online Popularity
2.53
Customer Positive Reviews
8.7
Customer Negative Reviews
1.3
Top Positive Reviews
A better option than having multiple POE injectors with their own power cables, much cheaper than a managed 8-port POE switch.
One of the best PoE Injectors....
Works just fine
Great product!
Works well with Ubiquiti products
Top Negative Reviews
I should have just bought the ubiquity poe switch
Product Highlights:
Instantly add PoE to any gigabit switch. This device will provide power and data for up to 8 Power over Ethernet devices like Phones, Cameras, Access Points and more. Power and data will be sent on Mode A (pins 1,2 3,6). The kit includes a 48v 60w UL power supply with 60 watts of available power for all devices combined.
Product Features
Extend power up to 328 ft (100 meters)
10/100/1000 Gigabit data capability
Provides power for 8 PoE devices with 60 watts total power
Use to power IEEE 802.3af
Passive Mode A Operation on pins (-1,2 +3,6)- "Always on" Power
Shielded RJ45 ports - 8 data (LAN) in, 8 Data + Power (PoE) out
650mA self resetting fuse per port
Instantly adds PoE to any network switch or router
Power supply included
48 volts DC, 1.25 amps, 60 watts
110 to 220 volt AC operation
90% efficient
UL, CE and FCC approved
Applications:
IP phones
WiFi Access points
IP Cameras
Other 802.3af Devices
Devices labeled "12 volt, POE" (please see our video on this topic)
USB, 5v and 12v , non-poe devices - please see our active splitters
Other products from PoE Texas
GPOE-4A-48v48w - 4 port version
GPOE-8A-48v120w - with 120 watts available
GPOE-8B-24v60w - for 24v passive PoE applications
GPOES-8-7AB-48v60w - with integrated switch
POE-8-48v60w - 8-port injector for 10/100 Mbps data speed
GPOE-12AB-48v120w - 12 port injector with 120 watts available
POE-Tester-GEN2 - Handheld voltmeter to display power used by a device
Gigabit Power over Ethernet injector, 8 port wall mount with 48 volt power supply 60 watts total shared by all 8 devices
For use with IEEE 802.3af devices like VOIP phones, WiFi Access Points, Cameras and more
Passive Mode A power shares data and power on pins 1,2 and 3,6 for 802.3af compatible devices
Includes a 48 volt 60 watt UL/CE/FCC certified power supply
Backed by our 1 year manufacturer warranty - For expert technical support from Austin, TX please call 512 479 0317
[Upgraded] 1Mii B06Pro Long Range Bluetooth Receiver, HiFi Wireless Audio Adapter, Bluetooth 5.0 Receiver with 3D Surround aptX Low Latency Optical RCA AUX 3.5mm Coaxial for Home Stereo System
1mii
More Details
8.8
Product rating
Product features
7.33
Online Popularity
10
Customer Positive Reviews
9.1
Customer Negative Reviews
0.9
Top Positive Reviews
Good receiver with optical output
It works as advertised!
Is it worth it? ABSOLUTELY
Exactly what I needed
No lag long range audio!
Top Negative Reviews
Almost perfect...
oh god the beeping
Terrible range.... Better units out there
Great Range - Poor for Multiple Devices
It sounds good. I experienced a lot of noise at low volume.
Product Highlights:
Upgraded 1Mii B06 Pro Wireless Bluetooth Receiver The new version(5. 0) Bluetooth adapter for home stereo helps you get rid of wires and enjoy a high quality wireless music freely. Why Choose US?-197FT Long Range for Bluetooth Music StreamingWith dual antennas, 1Mii B06 long range wireless Bluetooth adapter can achieve a range of up to 197ft (60m) line-of-sight in the open air and up to 50-70ft (20-30m) indoors(without obstacles). NOTE: operation range can be affected by Wi-Fi routers or antennas on the stereo receiver, etc. -OPT & AUX InApart from 3. 5mm and RCA AUX cables, this new version Bluetooth receiver is added an optical port so you can also use an optical cable for connection. -Volume ButtonsYou can press the volume button on the 1Mii B06 Pro Bluetooth receiver to adjust the volume. Also, you can press the volume +/- button for 2 seconds to do next or previous track. -apt-X Low LatencyThe 1Mii B06 Pro Bluetooth audio receiver for stereo implements the QCC3005 Bluetooth 5. 0 protocol and the apt-X Low Latency technology that delivers the superior sound quality. -Hi-Fi & 3D Surround SoundYou can switch to 3D mode to enjoy the surround sound with High Fidelity from a normal audio source. Its advanced internal chip takes charge of the conversion to make it possible, using convenient lossless codes. What's in the box?1x1Mii B06 Pro Bluetooth Receiver1xUSB Power Cable1xUSB Power Adapter1x3. 5mm Audio Cable1x3. 5mm Female to 2 RCA Male Cable1xUser's manualNote: please use 5V power supply! Do not use unmatched power sources (e. g. , 9V /12V), which may lead to equipment failure!
ã€DUAL ANTENNAS&LONG RANGE】With dual antennas and class 1 Bluetooth technology, the 1Mii B06 Pro Long Range Bluetooth receiver can achieve a range of up to 197ft (60m) line-of-sight in the open air and up to 50-70ft (20-30m) indoors(without obstacles). NOTE: operation range can be affected by Wi-Fi routers or antennas on the stereo receiver, etc.
ã€APTX LOW LATENCY&3D AUDIO】1Mii B06 Pro Bluetooth receiver for home stereo features QCC3005 Bluetooth 5. 0 chip to ensure high fidelity Bluetooth audio signal for music streaming to speakers or home stereo systems that doesn’t have the capability. This Bluetooth adapter also supports apt-X and apt-X Low Latency (apt-X-LL). And the 3D audio can be switched on or off by pressing the “3D†button on the Bluetooth audio receiver. The green LED will be on when switched to 3D audio.
ã€VOLUME & TRACK ADJUSTMENT】Press the volume button on the 1Mii B06 Pro Bluetooth receiver to volume up and down. Press and hold the volume button for 2 seconds to do next or previous track. (NEW FUNCTION)
ã€OPT&AUX&COAXIAL, EASY SETUP】Easy plug, pair and play. Plug into computer speakers, home stereo systems or other speaker systems via the 3. 5 mm, RCA, coaxial or optical cable, then pair the Bluetooth receiver with the Bluetooth audio devices such as smartphones or tablet. After that, you can enjoy the music. NOTE: This product is a receiver only, NOT a transmitter.
ã€WORKS WITH VOICE COMMANDS】Connect this 1Mii B06 Pro Bluetooth audio adapter to your stereo via a 3. 5 mm, RCA or optical cable, pair the Bluetooth receiver with your Echo via Bluetooth on the Alexa app, it is easy to control your music with voice commands. Please make sure to use the audio cable to connect the Bluetooth receiver with your stereo, not with the Echo.
The Kessil WiFi Dongle is the simplest, most reliable wireless lighting option in the market. Used together with the best-in-class A360X, the WiFi Dongle’s small frame plugs into the fixture’s K-Link port, and gives users the ability to remotely control a wide array of features through Kessil’s intuitive app. The Dongle is able to control dozens of lights from one reliable signal, thereby minimizing signal interference and leading to a faster, more reliable connection.
One Signal. Minimal Interference.
Why have a tangle of wireless signals for every light when you could only have one? Together with K-Link cables, the WiFi Dongle controls dozens of lights from one signal. This minimizes wireless interference, leading to a faster, more reliable connection.
Reliable Reception
The WiFi Dongle has passed long-term, in-depth field testing and antenna optimization to ensure reliability and efficiency. And with an extension cable, the WiFi Dongle can be easily relocated to the optimal location — perfect for retailers and canopy users.
Ease of Service
By keeping the light and its wireless capabilities separate, users can upgrade to the latest WiFi technology without replacing the entire fixture. This modularity also makes it easier to troubleshoot, further saving time and upgrade costs.
WiFi Controllability
The app gives users access to advanced manual controls and program customization, as well as the ability to sync groups of lights. Features include full color control, acclimation, lunar cycle, weather effects, and more!
Dashboard - A summary page to see the status of all the connected Dongles and A360Xs in one glance
Group - Dongles and daisy-chained A360Xs can be easily grouped and assigned different programs for advanced settings
Manual Mode - Adjust your A360Xs to any color and intensity via direct control. The individual color channels
With the Kessil WiFi Dongle you can control the Kessil A360X Tuna Blue LED Light and the Kessil A360X Tuna Sun LED Aquarium Light. The Dongle can be used instead of the Kessil Spectral Controller X. Using the free app and a smart phone you can control multiple Kessil X-Series lights that are connected together with the K-Link Cable. Having one WiFi connection for multiple lights minimizes wireless interference, leading to a faster, more reliable connection.
The WiFi Dongle plugs into the K-Link port on the A360X lights. You will hardly notice the addition as the Dongle is only 2" X 1.25" X .5".
The WiFi Dongle has passed long-term, in-depth field testing and antenna optimization to ensure reliability and efficiency. And with an extension cable, the WiFi Dongle can be easily relocated to the optimal location — perfect for canopy users.
By keeping the light and its wireless capabilities separate, users can upgrade to the latest WiFi technology without replacing the entire fixture. This modularity also makes it easier to troubleshoot, further saving time and upgrade costs.
The app gives users access to advanced manual controls and program customization, as well as the ability to sync groups of lights. Features include full color control, acclimation, lunar cycle, weather effects, and more!
![[Upgraded] 1Mii B06Pro Long Range Bluetooth Receiver, HiFi Wireless Audio Adapter, Bluetooth 5.0 Receiver with 3D Surround aptX Low Latency Optical RCA AUX 3.5mm Coaxial for Home Stereo System](images/upgraded-1mii-b06pro-long-range-bluetooth-receiver-hifi-wireless-audio-adapter-bluetooth-50-receiver-with-3d-surround-aptx-low-latency-optical-rca-aux.jpg)
