Solid unit, uses ATX PSU .. but could benifit by using the 12V rail in addition to the 5V rail.
MUST HAVE
Four Stars
Five Stars
Top Negative Reviews
No negative reviews yet.
Product Highlights:
It is capable of supplying 0.5 to 1 amp per port. Brand new and in the original packaging.
Do not overload the hub with a power supply that is too strong or you risk blowing the 70A fuse. We suggest using a 350-400W 12V ATX power supply.
Small and compact 49 Port USB hub; perfect for connecting a large array of usb devices
24-Pin ATX Power Supply (not included) uses 5V or 12V rail of PSU
Supports 110 to 230 volts
49 Front facing Standard A USB ports (all ports support 480M Full Speed)
0.5 to 1A per port (9 mm spacing between each port)
BEYIMEI PCIE 4X SATA Card 10 Ports,6 Gbps SATA 3.0 Controller PCIe Expansion Card,Non-Raid,Support 10 SATA 3.0 Devices,with Low Profile Bracket and 10 SATA Cables（Chip:ASM1166）
BEYIMEI
More Details
9
Product rating
Product features
6
Online Popularity
10
Customer Positive Reviews
9.1
Customer Negative Reviews
0.9
Top Positive Reviews
SATA Port Erweiterung für DVD Laufwerk in einem Lenovo SFF Büro PC - ACHTUNG: Helle blaue LEDs
Must-Have SATA III Erweiterungskarte für Besitzer älterer PCs.
bonne carte fonctionne avec OMV
Overcomes issue of too few SATA ports on Mainboard
Works Great
Top Negative Reviews
Treibersuche ist kritisch
Ca fonctionne (Linux & FreeBSD) mais je m'attendais a mieux niveau performance
Works but not optimally, Don't buy for SSD's else reduced Write/Read speeds will result
Instructions could be a lot better
perfomance is great
Product Highlights:
Size:PCI-E 10SATA
Product name: 10-port SATA3.0 expansion card
Product interface: PCI-E4X (chip signal is 2X)
Product chip: ASM1166
Support system: Windows 8 / Windows10 / Ubuntu /Linux.
(Synology can only recognize 4 hard drives; WIN7 users are not recommended to buy)
Specification:
â—Comply with Serial ATA 3.0 specification, backward compatible with SATA2.0 / SATA1.0
â—Comply with PCI-Express v3.0 specification and backward compatible with PCI-Express v2.0 / 1.0.
â—Support 6.0Gb/s, 3.0 Gbit/s and 1.5 Gbit/s
â—Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i.
â—Support Native Command Queuing (NCQ)
â—Support FIS based on port multiplier switch or command switch.
â—Support hot swap.
â—Compatible with SATA6G, 3G and 1.5G hard drives
â—Motherboard applicable slot PCI-Ex4 and above Note: PCI, PCI-E x1 cannot be used
Note: RAID is not supported. The RAID in INTEL only applies to raw SATA. It is an expansion card that cannot support third-party chips.
Speed description information:
1. Use SATA3.0 data cable to achieve the best results.
(We recommend using this SATA 3.0 card in the PCIE3.0 slot to get the fastest speed.)
2. PCI-E requires a slot above V2.0. For V1.0, the speed will not exceed 250M.
3. Motherboard BOIS setting: SATA mode should be changed to AHCI.
Although some motherboards are PCIE 2.0 version, BOIS does not enable gen2 high-speed mode by default and needs to be turned on manually.
The fastest speed of PCI-E 2.0 is 380-450 m/s.
Different computer configurations and SATA SSDs have different speeds.
âIf the detection is incomplete or unstable, please contact us to send the driver.
Packing List:
PCIe 4X to 10 Ports SATA 3.0 card *1
Half-height bracket baffle *1
SATA cable *10
10 Ports PCI-E to SATA 3.0：This PCIE SATA CARD allows you to add 10 SATA 3.0 6Gbps devices to your computer. No need to drive, plug and play.
PCI-Express X4 interface, Chip signal is 2X,compatible with PCI-Express X4 /X8 /X16 slots.(Recommended under PCI-E 3.0, faster use)
Powerful chip: ASMedia ASM1166 Chip, with heat sink, long-lasting high temperature resistance, high-speed and stable transmission.
System support: Compatible with Windows/8/10/Ubuntu/Linux.Support SATA interface hard disk/optical drive/SSD solid state drive.
Compatible with SATA 3 (6Gbps), SATA 2 (3Gbps), SATA 1 (1.5Gbps)。Comply with PCI-Express 3.0 specification and backward compatible with PCI-Express 2.0.
8 Port SATA III to PCIe 3.0 x1 Non-RAID Expansion Card Dual ASM1064 Low Profile Bracket
‎IO CREST
More Details
9
Product rating
Product features
7.33
Online Popularity
5.93
Customer Positive Reviews
9.3
Customer Negative Reviews
0.7
Top Positive Reviews
Works well in Windows 10 - you will get the full speed of the PCIE Gen3 x1 interface
No-frills SATA controller
Works well, but many superficial annoyances
PCIE 3.0 x1 card
Good enough
Top Negative Reviews
ASMedia 1064 Slower than the Marvel 8215 controller.
Worked, but saw no speed improvement
Works fine, a warning though - these cards don't work with Xpenology
Cannot boot on older HP P6-2220t PC
Product Highlights:
Size:8 Port SATA ASMedia
Supports 8 port 6Gb/s SATA III interface,Supports Port Multiplier,Supports Hot-Plug,Supports drive power control and staggered spin-up.Supports SATA Partial / Slumber power management state. ASM1064, a SATA host controller(AHCI) with upstream PCIe Gen3 x1 and downstream four SATA Gen3 ports. It’s a low latency, low cost and low power AHCI controller. With four SATA ports and cascaded port multipliers, ASM1064 can enable users to build up various high speed IO systems, including server, high capacity system storage or surveillance platforms.
PCIe Gen3 x1 interface to 8 ports NONE-RAID SATA III 6Gbps card will allow users add 8 x SATA III ports on desktop PCs, Servers, and NAS systems for storage expansions or AHCI boot use.
Select the ASMedia ASM1064 the most stable Non-Raid PCIE 3.0 SATA controller solution. PCIE 3.0 x1 interface provide 8Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage.
Supports Communication Speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps. Supports Port Multiplier
Supports Hot Plug and Hot Swap. Supports Native Command Queue (NCQ). Compliance Serial ATA AHCI Spec. Rev. 1.3, Serial ATA Rev. 3.0
Brand : ‎IO CREST
Item model number : ‎SI-PEX40165
Item Weight : ‎7.1 ounces
Product Dimensions : ‎3.5 x 4.75 x 0.75 inches
Item Dimensions LxWxH : ‎3.5 x 4.75 x 0.75 inches
StarTech.com 4 Port USB 3.1 PCI-e Card - 10Gbps - 4X USB w/Two Dedicated Channels - PCI Express Expansion Card/Adapter (PEXUSB314A2V)
‎STARTECH.COM
More Details
8.8
Product rating
Product features
10
Online Popularity
10
Customer Positive Reviews
9.0
Customer Negative Reviews
1.0
Top Positive Reviews
Blink And You'll Miss It!
Works great for Oculus Rift
Works in my 2009 Mac Pro
Exceeded My Expectations on a 14 core Unraid Server!
Fast card, a great addition to older PC's
Top Negative Reviews
Beware the description.
A $52 StarTech USB 3.1 Gen2 to replace a functioning $12 USB 3.0 Card, worth it?
Cheap but failed soon after minimal usage, not reliable
Not Yet
Amazing USB Module BUT
Product Highlights:
Style:4x USB-A w/10G Dual Channel
This USB 3.1 PCI-e card lets you add four USB Type A ports to your computer, through a PCI Express slot. With two independent 10Gbps channels, the card makes it easy to upgrade your PC to the faster speed of USB 3.1 Gen 2 so that you can access newer peripherals at twice the speed of traditional USB 3.0 (USB 3.1 Gen 1) cards. Faster USB Performance When multiple devices are connected, traditional single-bus USB cards share your maximum bandwidth between all ports. By employing two host controller chipsets, shared across two ports rather than four, this 4 port PCIe to USB 3.1 expansion card dedicates up to 10Gbps for each set of two USB ports. It reduces performance bottlenecks and doubles your total available bandwidth to 20Gbps. Room for Four Additional Devices With four external USB A ports you can connect more devices to your computer. This PCIe to USB adapter provides easy access to commonly-used peripherals such as your flash drive and external hard drive and allows you to connect to both current and future high-bandwidth USB-A devices. Compatible with Older USB Devices Connecting older peripherals isn’t a problem. This versatile USB 3.1 Gen 2 PCI-e expansion card is backward compatible with legacy USB 3.0/2.0 devices that use the common USB Type-A port, so you can eliminate the added expense and aggravation of purchasing new devices. This USB 3.1 PCI-e card is backed by a StarTech.com 2-year warranty and free lifetime technical support.
INCREASE YOUR USB CAPABILITIES: Add four USB Type-A ports with two independent 10Gbps channels to your computer, through a PCI Express slot with this PCIe to USB adapter card
ENHANCE YOUR COMPUTER’S PERFORMANCE: By adding 10Gbps USB ports to your computer, you can harness the speed of USB 3.1 Gen 2 and rest assured you’re ready for both current and future high-bandwidth USB-A devices
SHARED BANDWIDTH: This PCI Express USB adapter card features dual independent channels to your computer and shares 10Gbps of bandwidth between two USB ports
ADD A USB TYPE C DEVICE: For more flexibility, you can couple the USB 3.1 PCI-e card with a USB-C to USB-A cable and connect your USB Type C devices
Manufacturer : ‎STARTECH.COM
Part Number : ‎PEXUSB314A2V
Item Weight : ‎0.81 ounces
Product Dimensions : ‎4.92 x 4.72 x 0.59 inches
Item model number : ‎PEXUSB314A2V
Is Discontinued By Manufacturer : ‎No
Size : ‎4x USB-A w/10G Dual Channel
Style : ‎4x USB-A w/10G Dual Channel
Item Package Quantity : ‎1
Usage : ‎Personal, gaming, business
Included Components : ‎4-port USB 3.1 card (1), Quick-start guide (1)
MZHOU PCIe SATA Controller Card 10 Port with 10 SATA Cables and Low Profile Bracket - 6Gbps SATA 3.0 PCIe Card,Support 10 Port SATA 3.0 Devices
MZHOU
More Details
8.8
Product rating
Product features
6
Online Popularity
10
Customer Positive Reviews
9.0
Customer Negative Reviews
1.0
Top Positive Reviews
Works great with unRAID!
Works great with driver installed
Works strait out of the box no Drivers needed.
A normal 6 port SATA controller, they all work. I have no complaints.
After driver hiccup, everything working!
Top Negative Reviews
Nice product once you have the correct firmware installed
Card works, install not good, card software bad.
Works at first, Then SATA ports Fail. Now can't POST in BIOS. Will update review!
Cannot see 8 drives. the 4 drives it does see, works great.
Not suitable for Freenas or other BSDs, also hijacks your bios splash screen
Product Highlights:
Color:black
Descriptions:
Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps.
Support AHCI1.0 mode and IDE mode.
Support for native command queue (NCQ).
Support hot swap and hot swap.
Compatible with SATA6G, 3G and 1.5G hard drives.
Bus interface: PCI-Express x1 slot
Expansion interface: 10 ports SATA3.0 interfaces
System requirements: There is an available PCI Express X1 slot, which also supports PCI-E X2 X4 X8 X16
With this PCIe SATA card, you can add 10 SATA 3.0 6 Gbps devices to your computer (No need to install a driver and contact the seller if need the driver).
The PCIe SATA card contains ten SATA cables to simplify the connection!
Use the 1166+JMB575 chip to improve card stability and compatibility.
Use the 1166+JMB575 chip to improve card stability and compatibility. Connect 10 mass storage devices at the same time. With Windows XP/8/10 / MAC / NAS / Ubuntu(Not recommended to use win 7, it may be stuck).
Note: The 10-port does not support RAID. The RAID in INTEL is only for original SATA. It is an expansion card that cannot support third-party chips.
Sonnet Allegro Pro USB 3.2 Type A PCIe Card (Four SuperSpeed 10Gbps USB Connectors)
SONNET TECHNOLOGIES
More Details
8.8
Product rating
Product features
8
Online Popularity
10
Customer Positive Reviews
9.1
Customer Negative Reviews
0.9
Top Positive Reviews
Installation is Easy. Works with the Mid-2012 Mac Pro
NO! on MacPro 4,1 - Yes! on MacPro 5,1
Revived my 2010 MacPro
Incompatible with HP Z4 G4 workstation
and this PCIe card did not disappoint! Just install and download the driver
Top Negative Reviews
Unleashes max performance of any USB3 storage device but drops ports occasionally.
Needs clearer instructions
Works with Mac, if you don' mind error message when your drives wake up
Partially functional in my 2010 Mac Pro
Does not work for PCI Passthrough with vfio
Product Highlights:
SuperSpeed+ 10Gbps USB Ports—Adds four 10Gbps USB-A ports to your Mac Pro or Windows PC computer with PCIe slots; or Thunderbolt to PCIe card expansion system
Dual USB 3.2 Gen 2 Controllers—Support data transfers at up to twice as fast as USB 3.0 and USB 3.1 Gen 1, and boost data transfer speeds between connected drives
Powered Ports—Supports USB bus-powered SSD, SSD RAID, and hard drive devices with up to 7.5W power per port
Protected Power Delivery—Independent power regulation isolates each port to prevent cross-coupled power glitches that may cause accidental disconnects; resettable device overcurrent fuses protect the card and computer, and may be reset by a simple shutdown
2-year warranty and free lifetime customer support since 1986
ELIATER PCIe SATA Card 10 Port with 10 SATA Cables, SATA III 6 Gbps SATA Controller Expansion Card with Low Profile Bracket for Desktop PC, ASM1062+JMB585 Chip, Support 10 SATA 3.0 Devices
‎ELIATER
More Details
8.8
Product rating
Product features
7.33
Online Popularity
2
Customer Positive Reviews
8.6
Customer Negative Reviews
1.4
Top Positive Reviews
Works perfectly in Win10
Works perfectly out of the box.
installed with ubuntu LTS, no issues with drivers
Great compatibility
Plug and play for Linux and FreeBSD
Top Negative Reviews
low cost, unstable, causes random system problems
Product Highlights:
Color:PCIE SATA Card 10 Port
This SATA PCIe card allows you to add 10 6Gbps SATA 3.0 devices to your computer simultaneously and support hot plug and hot swap. Support Windows 10 / 8 / 7 (32/64-bit) and Linux operating system. Please make sure the computer is turned off before inserting or removing the card, then insert the card to avoid damaging the motherboard or expansion card.
Advantages:
Efficiently solve the problem of the motherboard PCI - E interface is not enough.
Plug-in design can be fixed on the chassis, stability and reliability are greatly improved.
PCIe interface direct power supply mode, without external power cable, the mainboard power supply is free from external interference.
Reduce the number of adapters and transmission lines, effectively reduce interface interference and line loss, ensure data reliability, and improve work efficiency.
Supports 4 Soft RAID Mode:
RAID1(SAFE Mode): The two hard disks backup each other with the same data. If one of the hard disks is damaged, the data can be recovered without losing data.
AHCI1(PM Mode): The data stored in each individual hard disk. If several hard disks are inserted, several hard disks will be displayed.
SPAN(BIG Mode): In this mode, the capacity of disk is the largest. But if the hard disk is damaged, the data will be lost.
RAIDO(FAST Mode): Data will be stored on multiple hard disks to form a whole, the theoretical speed is twice that of a single disk.
Package Includes:
1x PCI-e 1X to 10 Port SATA 3.0 Expansion card
1x Low bracket
1x Driver disc
10x SATA cables
ã€PCIe to SATA 3.0 10 Ports Expansion Card】 Using a PCIe SATA card and 10 SATA cables, you can add 10 SATA 3.0 6Gbps / s devices to your computer.Also, it is a simple and small solution to expand your sata storage by 10x.
ã€High Performance Chipset】 The 10-port SATA controller based on JMB585+ASM1062 chipset offers more stable, with heat sink, long-lasting high temperature resistance, providing speed up to 1700 MB/s.
ã€Wide Compatibility】 Hot swappable, plug and play, compatible with Windows 10/8/7 / Vista / XP, Mac OS 9/10 and Linux above.
ã€Support PCIe X1/ X4 / X8 / X16 Interface】 The PCIe to SATA III 10-port expansion card comes with a low profile bracket and 10 SATA cables to fit into PCIe X1/ X4 / X8 / X16 slots.
ã€What You Get】 1 x PCIe to SATA 3.0 10-port controller card, 10 x SATA cable, 1 x Driver disc, 1 x Low profile Bracket. If you have any questions about the products, please contact us, we are always at your service.
